
High Water Pressure Causing Leaking Toilets and Faucets? Here's How We Solved the Problem in Buford, GA
Multiple Leaking Toilets and Faucets? The Real Problem May Be Your Water Pressure
Most homeowners assume a leaking toilet or dripping faucet simply needs a new part. While that can sometimes solve the issue, multiple plumbing fixtures leaking at the same time often point to a much bigger problem.
Recently, our team at Request The Best Plumber was called to a home in Buford, GA, where the homeowner was dealing with several leaking toilets and faucets throughout the house. Instead of immediately replacing fixtures, we performed a complete plumbing inspection to determine the root cause.
After testing the home's plumbing system, we discovered the culprit: dangerously high water pressure caused by a failed pressure reducing valve (PRV).
Customer's Plumbing Problem
The homeowner contacted us because they had noticed:
- Multiple leaking toilets
- Faucets dripping throughout the home
- Higher-than-normal water usage
- Concerns about costly plumbing repairs
- Worry that something more serious was wrong
When several plumbing fixtures begin leaking around the same time, experienced plumbers know it's important to inspect the entire plumbing system—not just the individual fixtures.
That's exactly what we did.
Testing the Home's Water Pressure
One of the first diagnostic steps our licensed plumbers perform is checking the home's water pressure.
Using a professional pressure gauge, we tested the incoming water pressure and found it measured:
**115 PSI**
For comparison:
- Ideal residential water pressure: 50–60 PSI
- Acceptable range: 40–80 PSI
- Anything over 80 PSI: Can damage your plumbing system
At 115 PSI, this home's plumbing was operating under nearly double the recommended pressure.
That excessive pressure was placing constant stress on:
- Toilets
- Bathroom faucets
- Kitchen faucets
- Water supply lines
- Shut-off valves
- Pipe joints
- Water heater
- Dishwasher
- Washing machine hoses
- Ice maker supply lines
Over time, this level of pressure can lead to expensive plumbing repairs if left unaddressed.

The Diagnosis: Failed Pressure Reducing Valve (PRV)
After completing our inspection, we confirmed the home's pressure reducing valve (PRV) had failed.
A pressure reducing valve is installed where the main water line enters your home. Its job is to reduce the city's incoming water pressure to a safe level before it flows through your plumbing system.
When the PRV fails, your home's plumbing receives whatever pressure the municipal water supply is delivering.
The result can include:
- Constant faucet leaks
- Running toilets
- Burst pipes
- Water hammer (loud banging pipes)
- Water heater damage
- Premature appliance failure
- Increased water bills
- Repeated plumbing repairs
Many homeowners replace faucets or toilet parts only to have the leaks return because the real issue—high water pressure—was never corrected.
Our Repair
Once we identified the failed pressure reducing valve, we replaced it with a new, properly sized PRV.
After installation, we tested the water pressure again.
Before Repair
115 PSI
After Repair
55 PSI
The new pressure reading is exactly where a residential plumbing system should be.
With the pressure restored to a safe level, the strain on the home's plumbing was eliminated, helping protect every fixture and appliance connected to the water supply.
Why Maintaining Proper Water Pressure Is So Important
Many homeowners never think about their home's water pressure until something begins leaking.
However, maintaining proper pressure helps:
- Protect your plumbing system
- Prevent expensive pipe repairs
- Extend the life of toilets and faucets
- Reduce unnecessary water waste
- Protect your water heater
- Prevent appliance damage
- Lower monthly water bills
- Reduce the risk of emergency plumbing issues
A properly functioning pressure reducing valve is one of the best ways to protect your entire plumbing system.
Signs You May Have High Water Pressure
You may have excessive water pressure if you notice:
- Multiple leaking faucets
- Toilets that continue running
- Pipes making banging noises
- Water spraying aggressively from faucets
- Frequent plumbing repairs
- Appliance water line failures
- Rising water bills
- Leaks developing throughout the home
If you notice any of these warning signs, it's a good idea to have your home's water pressure professionally tested.
Pressure Reducing Valve Replacement in Buford, GA
At Request The Best Plumber, we help homeowners throughout Buford, GA diagnose and repair plumbing problems before they become expensive emergencies.
Whether you're dealing with leaking toilets, dripping faucets, high water pressure, or a failed pressure reducing valve, our experienced plumbers will identify the source of the problem and recommend the right solution—not just a temporary fix.
We proudly provide plumbing services in Buford, Gainesville, Flowery Branch, Oakwood, Sugar Hill, Suwanee, Braselton, Hoschton, and surrounding North Georgia communities.
If you've noticed multiple plumbing fixtures leaking or think your home's water pressure may be too high, don't wait until a small issue turns into a major repair.
Contact Request The Best Plumber today to schedule a professional plumbing inspection and water pressure test. Our team is ready to help protect your home with fast, honest, and reliable emergency plumbing service.