Toilet Keeps Running? Here's Why (Buford, GA Homeowner Guide)
    Back to Blog
    Toilet Repair
    August 10, 20268 min read

    Toilet Keeps Running? Here's Why (Buford, GA Homeowner Guide)

    A toilet that won't stop running might seem like a small annoyance, but it can waste hundreds of gallons of water every day, increase your monthly water bill, and even indicate a larger plumbing issue. While some running toilets are caused by inexpensive parts that can be replaced quickly, others may point to problems inside the tank or with your home's plumbing system.

    At Request The Best Plumber, we help homeowners throughout Buford, Gainesville, Flowery Branch, and Oakwood diagnose and repair running toilets every day. Whether your toilet runs continuously, cycles on and off, or never fully refills, understanding the cause can help you avoid expensive water bills and prevent further damage.

    Why Does My Toilet Keep Running?

    Your toilet depends on several small components working together every time you flush. If even one part fails, water may continue flowing into the bowl long after the tank should have stopped filling.

    The most common causes include:

    • Worn-out flapper
    • Faulty fill valve
    • Incorrect float height
    • Loose or tangled chain
    • Overflow tube issues
    • Mineral buildup
    • High water pressure
    • Cracked toilet tank components

    Fortunately, many of these problems can be repaired without replacing the entire toilet.

    1. Worn or Damaged Flapper

    The flapper is the rubber seal at the bottom of your toilet tank. After flushing, it should close tightly to stop water from entering the bowl.

    Over time, flappers wear out due to:

    • Age
    • Hard water
    • Mineral deposits
    • Constant use

    When the seal no longer closes completely, water slowly leaks into the bowl. The fill valve senses the water level dropping and continually refills the tank, creating an endless running cycle.

    This is one of the most common—and easiest—repairs.

    2. Faulty Fill Valve

    The fill valve controls how much water enters the tank after each flush.

    If it becomes worn or clogged, it may:

    • Continue filling the tank
    • Shut off too late
    • Fail to shut off at all
    • Make hissing noises

    A faulty fill valve often causes constant running water and higher utility bills.

    3. Float Set Too High

    The float tells the fill valve when enough water has entered the tank.

    If it's adjusted too high:

    • Water rises above the proper level.
    • Excess water flows into the overflow tube.
    • The toilet never completely shuts off.

    Sometimes a simple adjustment solves the problem within minutes.

    4. Chain Problems

    The chain connects the flush handle to the flapper.

    If it's:

    • Too tight
    • Too loose
    • Tangled
    • Rusted

    the flapper may never fully seal.

    This allows water to continuously escape into the bowl.

    5. Overflow Tube Problems

    The overflow tube prevents the toilet tank from overflowing.

    However, if water constantly pours into this tube, your toilet will continue running indefinitely.

    Overflow issues usually stem from:

    • Improper float adjustment
    • Faulty fill valve
    • Incorrect water level

    6. Hard Water and Mineral Buildup

    In North Georgia, mineral deposits can accumulate inside toilet components.

    Over time this buildup can:

    • Prevent valves from sealing
    • Restrict moving parts
    • Damage rubber seals
    • Cause inconsistent flushing

    Professional cleaning or part replacement often restores proper operation.

    7. High Water Pressure

    Many homeowners don't realize that excessive water pressure affects much more than faucets and showerheads.

    High pressure can:

    • Wear out toilet valves
    • Shorten flapper life
    • Damage plumbing fixtures
    • Increase leaks throughout the home

    If you've noticed leaking faucets, constantly running toilets, or frequent plumbing repairs, high water pressure may be the root cause.

    Our plumbers can test your home's water pressure and inspect the pressure reducing valve (PRV) if needed.

    How Much Water Does a Running Toilet Waste?

    A running toilet isn't just annoying—it can become surprisingly expensive.

    Depending on the severity of the leak, a running toilet may waste:

    • Up to 200 gallons of water per day
    • Thousands of gallons every month
    • Tens of thousands of gallons each year

    That wasted water often shows up as a much higher utility bill.

    If you've recently noticed an unexplained increase in your water bill, your toilet could be the culprit. Learn more about hidden leaks in our guide: Why Is My Water Bill So High? Hidden Plumbing Leaks Every Buford, GA Homeowner Should Know About.

    Can I Fix a Running Toilet Myself?

    Some issues are simple enough for homeowners to address, such as:

    • Replacing the flapper
    • Adjusting the float
    • Untangling the chain

    However, if the toilet continues running after these adjustments—or if you're unsure of the cause—it's best to have a professional inspect it.

    Replacing the wrong part or overlooking another issue can lead to continued leaks and unnecessary frustration.

    Signs You Should Call a Plumber

    It's time to contact a professional if:

    • The toilet runs constantly.
    • The tank won't stop filling.
    • You hear water running between flushes.
    • Water leaks around the base.
    • The toilet flushes weakly.
    • The handle sticks.
    • Your water bill suddenly increases.
    • Multiple toilets have the same problem.

    These symptoms can indicate a more serious plumbing issue that requires professional diagnosis.

    Preventing Future Toilet Problems

    Routine maintenance can help extend the life of your toilet's internal components.

    Helpful maintenance tips include:

    • Inspect the flapper once a year.
    • Replace worn rubber parts before they fail.
    • Avoid using harsh chemical cleaners inside the tank.
    • Address high water pressure if present.
    • Schedule plumbing inspections if your home is older.

    Small preventative repairs are almost always less expensive than emergency plumbing visits.

    Why Homeowners Choose Request The Best Plumber

    When homeowners in Buford, Gainesville, Flowery Branch, and Oakwood need toilet repairs, they trust Request The Best Plumber for honest recommendations and dependable service.

    Our experienced plumbers can quickly diagnose why your toilet keeps running and repair the problem correctly the first time. Whether it's a worn flapper, faulty fill valve, high water pressure, or another plumbing issue, we'll explain your options and provide lasting solutions—not temporary fixes.

    Frequently Asked Questions

    Why won't my toilet stop running after I flush?

    The most common causes are a worn flapper, faulty fill valve, incorrect float adjustment, or a chain that's preventing the flapper from sealing.

    Is a running toilet expensive?

    Yes. Even a small leak can waste hundreds of gallons of water per day, increasing your monthly utility bill.

    Can high water pressure cause a running toilet?

    Yes. Excessive water pressure can wear out toilet components faster and contribute to leaks and constant running.

    How long does a toilet repair take?

    Most common toilet repairs can be completed in less than an hour, depending on the issue.

    Should I replace my toilet instead of repairing it?

    If the toilet bowl or tank is cracked, replacement may be necessary. Most internal component failures can be repaired without replacing the entire toilet.

    Related Reading

    Schedule Toilet Repair in Buford, GA

    If your toilet keeps running, don't ignore it. What starts as a small leak can waste thousands of gallons of water and lead to expensive utility bills over time.

    Request The Best Plumber proudly serves homeowners throughout Buford, Gainesville, Flowery Branch, and Oakwood, GA with professional toilet repair, leak detection, and general plumbing services. Our experienced team will diagnose the problem, explain your options, and restore your toilet to proper working order.

    Contact Request The Best Plumber today to schedule fast, reliable toilet repair.

    Need Emergency Plumbing Service?

    Fast, reliable, and professional plumbing services across Gainesville, Oakwood, and nearby Georgia communities. Licensed. Insured. Trusted.

    Licensed & Insured
    Emergency Service
    Residential & Commercial
    Fast Response Times